Author Archives: Admin

Lead Wool Blankets: Crucial For Radiological Protection

The radiation sites are the most hazardous and can cause unforeseen problems in case the gases mix with the outside atmosphere. In order to block the flow of radiations in the outside environment, the radiation shields in the form of blankets made of lead, as also sometimes tungsten, play a vital role. The blankets can be manufactured as per the configuration required.

Portable high utility radiation shielding blanket

The portable nature of the lead wool blankets make it the best fit for the enclosed areas of radiation. The percentage of shield from gamma, beta energies required can be the best ways to select the blankets. The toughness of the blankets also is complemented with flexibility as these can be rolled in various layers around a pipe, hung on walls, etc. The testing machines are available to test the grommet strength and tensile force to avoid any kind of failures during the process. Breaking with the help of jaws is the best test for the grommets on it. Even filter hosing can be covered with this amazing radiation shielding equipment of high utility. The best part is the weight and the grommets makes the blankets very easy to use as the need for the wires or straps do not arise while installing it.

The expert designing techniques


The lead plates or lead wool are the main components of lead wool blankets. The blankets are less solid than the lead plates themselves, hence light weight and with multi-purpose uses. The lead strands from .005 to .015 inches of diameter and also of different sizes are used in the manufacture as per requirement. The most basic grounds of protection lies in the double encapsulations of this blanket; with the inner covering being lighter than the outer covering. The two coverings prevent any contamination of lead due to cut or wear and tear.

The material used for the coverings are sewn in quilted pattern and have heat sealed seams. These can be either vinyl laminate which are available in yellow or white. The other options being the silicon fibreglass fabric or the urethane laminated nylon. The hanging facilitation is complete with the perforations and eyelets to facilitate ease in hanging and placement at the nuclear sites. The size, spacing of the grommets can be changed or ordered as per requirement from the blanket providers.

The grommets provide good stability to the lead wool inside from moving when hung or draped on nuclear equipment. The colour is gray and this is suggestive of its resistance to high temperatures. The dose rate reduction of the harmful chemicals is directly correlated to the thickness of the blanket and the lead plate and also its density. For example lead wool of 20 lbs/ sq. feet and approximately three fourth inch thickness of blanket and one fourth inch thickness of lead sheet can help a dose reduction of around a huge 31%. The shapes range from rectangular to tapered varieties. The Federal specification of QQC-40 Type 2 Grade C is normally used in nuclear sites of U.S.A.


Key Types Of Radiation Shielding Supplies

Radiation shielding equipments are used in a wide variety of radiologic applications. The use of radiation in the field of diagnosing and in treating the patients has advanced to a significant extent in the medical field.

Radiation shielding supplies are manufactured from lead. Lead shielding is widely used in a wide variety of applications which includes diagnostic imaging, industrial shielding and radiation therapy as well. Radiation shields are the materials are used to protect human beings from harmful radiation effects. It is placed between the radiation source and the humans. The process of radiation shielding is quite effective depending upon the thickness of the radiation shield material, type of radiation, and length between the object and the radiation should be minimal.

The majority of the radiation is caused by the gamma radiation, x-rays, beta rays, alpha particles and the neutrons. Alpha particles have greater penetrating power and it can be stopped with the help cloth piece. But gamma rays and the x-rays are highly potential destroyers.

Lead shielding products


  • The main function of lead in nuclear plants is to protect the radioactive materials which are produced in the reactor and to protect the harmful radiations. Lead bricks, core lead pipes, lead wool, lead sheets are some of the radioactive materials which are used in the nuclear plants. Lead shields and the lead foils are the most commonly used radioactive shielding accessories.
  • Nuclear pharmacy makes use of a wide range of radioactive elements in order to treat specific ailments. The medical field requires handling of various radioactive materials which emits harmful radiations and hence requires shielding equipments.

Some of the most common lead shielding equipments which are used in the industry are glass plates, glass equipments and lead shielded syringes. Radiation proof shielded doors are used in the X-ray rooms. Lead shielded gloves, curtains aprons, collar are widely used by the medical practitioners who are handling with the radioactive materials. Lead containers are widely used for storing the samples required for the tests and for treating the diseases which make use of radioactive materials.

  • Lead sheets – Lead sheets are widely used to weaken certain kinds of radiations due to its high density and atomic number. They are quite effective in stopping the alpha rays, x-rays and the gamma rays. It is more effective than neutron radiation.


Lead sheets are widely used for nuclear shielding at the power plants, labs and at military installations. Lead sheets are used where radiation requirements are quite low. They can be also used to construct walls and other similar structures. Hence, it can be used to produce permanent solutions.


Lead bricks are used to build shielding walls for temporary or permanent storage locations. They provide greater flexibility and protection from all sorts of nuclear radiations. The smooth surface of the lead bricks enables for easy removal of the radioactive dust elements from the lead shield.

The above mentioned are some of the common examples of Radiation shielding supplies


The Importance of Nuclear Shielding

The process that happens within a nuclear reactor produces large amounts of heat, as a result of the fission process. But other, more harmful by-products are also produced during the splitting of a nucleus, which is how nuclear fuel is created: alpha rays, beta rays, gamma rays, and fast-moving neutrons are all results of the combustion process taking place inside a nuclear reactor. Alpha, beta, and gamma rays are all forms of radiation that would enter the air and damage surrounding plants and animals, not to mention the workers inside the plant and all of the people in surrounding towns. If not contained properly, these invisible rays could leak out and cause massive, long-lasting damage to any materials and men it came in contact with. This is why nuclear shielding, which is the process of containing radiation and preventing it from entering the atmosphere, is so important.

Concrete and Steel

Many different materials can be used to create a nuclear shield, but concrete and steel are as effective as they are strong, so they are used most often in the formation of nuclear shields. The thickness of the steel and concrete is of the utmost importance when it comes to a nuclear shield: a typical reactor core requires an inner lining of steel almost half a meter thick. Even this thick steel shield is not enough to contain seemingly innocent, invisible rays of radiation. Outside of that layer of steel, the barrier is reinforced by several meters of concrete.

Further Protection Measures

S1Because radiation is so harmful to humans, many types of instruments are installed at different points in in the radiation hazard areas. These devices monitor levels of radiation at positions in the nuclear facility such as personnel exit zones. They measure the amount of ambient radiation (usually x-ray, gamma rays, or neutrons) in the facility. These types of radiation are the types that have the widest range. Airborne contamination monitors are used to measure the ambient radiation and will typically give an alarm to a safety system that informs personnel to evacuate the affected area, and prevents more people from entering the area. Essentially, this tool forces a nuclear plant lock-down when necessary.

Personnel exit monitors (PEM) are also used to monitor workers who are leaving sites of high radioactivity. These monitors check the body and clothing of personnel for alpha, beta, and gamma rays.

Nuclear shielding is top-priority at a nuclear power plant, for the safety of everyone in the plant as well as in the surrounding area. Because protecting citizens from these damaging rays is so important, even the thick layers of shielding are not relied on entirely, but are closely and constantly monitored


Safety Floor Shields: Why Nuclear Facilities Need Them

The Nuclear crisis is the one of the hazardous condition that may happen in the endearment of nuclear plants and other related industries. This type of nuclear attacks may kill so many workers. So in order to avoid and to protect workers from this dangerous condition, safety shielding for floor is a very essential thing in industries. Taking a shelter with proper shielding is very necessary in the nuclear radiation environments.

Radiation shielding

The most harmful parts of the nuke attacks are residual nuclear radiation and initial nuclear radiations. The alpha, gamma and beta are the three types of nuclear radiation. Alpha radiation can be shielded by human skin or sheet of paper. The gamma radiation is also most dangerous, so it needs a thick shielding. So to get the safety from these types of harmful radiation safety floor shields are very helpful. In addition to this, some of the problems listed below also need the floor shielding.

  • On the floor, the level of contamination usually is in the millions of dpm per cm2. Anybody moving through the places could create airborne contamination levels in extreme ranges that would cross the safety factors of the respiration tool. So these places require being decontaminated.
  • The tents should be incorporated into building through a four foot wide airlock door. There are only a few employees provided to the task and setting up the large containment would be hard. Not like most tasks the external surfaces of the containment and inner surfaces would be uncontaminated.
  • If the building is narrow, then it is difficult to install the containments and also it’s supporting tools. In the process cell radiation levels estimated would be high, so these areas needs floor shielding to protect the workers. This place, usually covers on the top of each bank and workers are restricted to enter it.

Significance of floor shields


The floor radiation shielding is associated with a system of lead lined plywood panels which form a continuous layer, safeguards the lower levels of your buildings from the emission of radiation in an environment such as Nuclear shielding, X-ray protection and many more. Depending on the thickness shielding reduces the intensity of the radiation in the nuclear plants. This is an exponential affiliation with steadily retreating belongings as equivalent slices of safety floor shields substance are included.

The safety shielding for floor incorporates with several durable materials for lamination. The materials are designed with different atomic numbers to protect against the nuclear fallout such as ionizing radiation. This offers so many benefits such as: Protection from radiation damages and reduction of background noise for detectors. Some of the type of shielding capable of observing gamma rays which produce the X ray fluorescence. Eventually the energy can be reduced to suitable levels as each layer of substance absorbs the previous material’s x ray fluorescence. For safer use, these designed with solvent free formulation and also have durable finish and easier to clean. These are simple to apply and also have features such as fire resistant, anti slip and anti bacterial.


Are Nuclear Waste Sites Something To Worry About?

The procedure of harnessing nuclear energy is not only complex, but also risky, as it involves the radioactivity of uranium with many neutrons to produce energy. Besides, the ramifications of the radioactive emissions into the atmosphere being threatening, also a potential concern about the large amount of nuclear waste disposal is there are many regions of the world. There are many safer ways to dispose the waste, however the delay in the disposal at the nuclear waste sites happens due to political interests can inhibit the process as it can lead to higher accumulation of waste like in case of many areas of U.S.A which can be some reason to worry about.

Safe and systematic waste disposal methods

There are 4 major types of waste generated in nuclear reactors, very low level waste, low level waste, intermediate level and high level waste. The very low level waste is not harmful in nature and mainly consists of concrete, plastic, bricks, metals of the demolished nuclear power plants which are thrown away with the normal domestic waste.

The low level waste have only one percent of radioactive elements which have transitory presence and include the radioactive shields like protective clothing, flexible HEPA Grade Filters, papers, woollen blankets, etc which are normally incinerated and hence easy to dispose off. The Intermediate level wastes are reactive radioactive elements like chemicals, resins, nuclear radiation shielding equipments which have comparatively higher shelf life.

High level wastes are the ash remains from the uranium reactions. These need to be disposed off carefully as the high radioactivity, around 95% is many times long lived like anticinides. The used fuel and the fission by-products like depleted uranium are waste, however can be reprocessed for use in many practical applications like use in military projectiles, etc.

The recycling of the major waste is conducted which also leaves with a small amount of waste. The recycling of steel of the gas plants with low levels of radioactivity is common. Coal ash is the highest waste in terms of quantity. The deep underground disposal is common method for nuclear uranium ash. These are first placed in cooling pools to cool down the radioactive activities in it.

New and safe methods of disposal- less cause of worry

The storage of interim and low level waste of the nuclear reactors is many times done in shock absorbing containers before the geological land based disposal. Nowadays, many studies and ideas of throwing the high reaction nuclear waste has been made with both feasible nuclear waste sites options like trapping the waste in rocks and making it melt, disposal under the sea bed or in the ice sheets and many such methods. The risk of theft of the waste needs to be curbed with safe and secured disposal which disallows manufacturing of nuclear weapons from these, especially plutonium and uranium which can lead to nuclear wars and be dangerous to the human race. The Nuclear Regulatory Commission is taking all measures to ensure traditional methods of disposal are not followed. Environmentally sound methods need to be thus, adopted to ensure the safety of the employees and also the public from the toxicity emanated.


What A HEPA Filtration Unit Is Used For?

There are numerous damaging contaminants that will infiltrate significant areas in a wide range. Impurities will enter by air or otherwise on the feet of any such carrier moving amid the external atmosphere and inside the vital space, for instance. To have a clean and better living environment, excellent air quality is essential. This particular demand has resulted to the creation of HEPA air filters.

High efficiency particle arresting best known as HEPA is a sort of air filter, designed to remove tiny airborne particles of size 0.3 microns with about 99.97% efficiency. A filter meeting the HEPA standard finds their applications in many fields such as they are utilized in homes, medical facilities, aircrafts, automobiles and more.

Explore the many uses of a HEPA air filter

A HEPA filtration unit utilized in the medical or surgical sector incorporates high energy UV light weight units in order to kill the bacterium or viruses and keep them at bay by the efficient filter media. These crucial measures limit the quantity of pollutant particulates amid the atmosphere. Researchers have revealed fact that about 80% of infectivity or contamination tends to enter the clean room via exits and entrances. In order to combat this issue, suitable flooring systems are utilized which attracts, retain as well as inhibit the expansion of particulates or viable organisms.

S4This filtration unit is helpful for asthma sufferers as well. People with Asthma usually suffer with allergic asthma or extrinsic asthma and they are at high risk when the airborne particles trigger such as mold, dust, pet dander and pollen are in the air. Unfiltered air increases the severity and frequency of asthma attacks. Thus, in order to avert this it is recommended to use a HEPA air filter.

Apart from medical applications, HEPA filtration unit can be beneficial for you in your office or home every day. The following lists a few;

Removes Pet dander – If you have an adorable furry pet, a cat, bird, dog or any other, they all produce dead skin (flakes of dry) known as dander. The dander usually ranges in the size from 0.5 – 10 microns. Breathing the greater volumes of these particles produced by pets on a daily basis is neither good for humans or pets as well. Filtering the air is the one best way to avert ingestion or inhalation of these particulates, which can lead to several respiratory ailments.

Controls virus and bacteria – These typically spread by attaching to larger dust or airborne particles and thus, making them an easier and essential air target for an air purifier to eliminate.

Removes Dust – Dust is undeniably the bane of indoor spaces and is apparently relentless in coating many surfaces in offices or homes. Dust is typically a combination of dirt from the exterior that combines with the lint. Lint is a tiny piece of fiber from carpet, clothing, pet or human hair. So a house with kids and pets that are often moving out would produce more dust when compared to an abode that sees very less activity.

Many of these contaminants are difficult to remove from the air without the aid of HEPA air filter!


Acceptable Levels of Radiation Exposure

The side effects and the hazards that the exposure to radiation can lead to often terrifies the human race. However for people working in the radiation companies, these radiation exposures are quite common. Although there are several safety protocols being implemented by the companies still it is important to know the amount of radiation that a human body can bear without producing any hazardous effects. If you believe the researchers, natural eatables like banana and potatoes also have certain level of radiation within them as they are quite high in potassium. However the fact about how much radiation exposure can be harmful for the human body still remains undisclosed.

Radiation exposure and its principles

S5There are generally two principles regarding the exposure to radiation. According to these principles, a person must not be exposed to acute exposure and to limit the exposure of the person to acceptable levels too. Almost all, the exposure guidelines are given by the International Commission on Radiological protection (ICRP) is considered more accurate. The current guidelines given by ICRP is based on the traditional assumption that even a small amount of exposure can lead to hazardous results in the human body leading to genetic mutation and cancer. This assumption has lead to the guideline that all the radiation must be kept as low as possible.

Occupational exposure and regulatory limits

The “as low as possible” guideline is usually for the whole country; however for people involved in the radiological industry, the guidelines are a bit different. Various guidelines regarding the dosage of radiations are clearly depicted by the ICRP. For an occupational employee, the radiation exposure must not exceed 5 rems. The guideline states the acceptable level of exposure according to the body part. The eye dose equivalent, shallow dose equivalent and the organ dose equivalent are some of the major parameters that decide the exposure levels for a professional working in a radiological company.

While the shallow dose equivalent is for the external dosage to the skin only, the organ dosage equivalent is for the exposure of the harmful radiation to the internal organs. The equivalent as well as their dosage limit is as below:

  • Shallow dose equivalent: 50 rems.
  • Lens dose equivalent: 15 rems.
  • Total organ dose equivalent: 50 rems.

Acceptable radiation exposure for pregnant woman and minors:

Due to the genetic mutation and a number of other risks that the radiation exposure can cause, a pregnant woman is not expected to receive more than 0.5 rem exposure for the complete gestation period. The same is applied to the minors i.e. people below the age 18.

Acceptable level of exposure to radiation for public

For public and non workers, the maximum exposure that one can receive should not be more than 0.1 rem/year which is almost 2% of the total exposure received by an employee; working in a radiological company. There are several other sources from which the human body can be prone to radiation which is estimated to be 0.3rem/year. Thus a total exposure of 0.5rem/year is acceptable for common man.